Details
and small
parts.
and small
parts.
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
Grab Irons. Type #5
These are steel grab irons for that very detailed look .
These are available in 1 1/2''- 6'' wide, !/8'' diameter
Holes are .120 diameter for a 4-40 bolt,
These are punched out with special
tooling for exact size every time, Wire is blended
into flat also like the prototype !!!
Price; Up to 3'' wide. $ 2.00 each
3''- 6'' wide $ 2.50 each
Quanity discounts over 50. call
These are steel grab irons for that very detailed look .
These are available in 1 1/2''- 6'' wide, !/8'' diameter
Holes are .120 diameter for a 4-40 bolt,
These are punched out with special
tooling for exact size every time, Wire is blended
into flat also like the prototype !!!
Price; Up to 3'' wide. $ 2.00 each
3''- 6'' wide $ 2.50 each
Quanity discounts over 50. call
Grab Irons Type # 7 STRAIGHT
Same as description above for application and pricing.
Check out how the wire is blended into the flat section.
Same as description above for application and pricing.
Check out how the wire is blended into the flat section.
# 5
Ladder Kits
These are our modern car ladder kits, come with every thing pictured.
Long ladder kit is 8 inches tall.
Short ladder kit is 5 1/4 inches tall.
Both come with 14'' long connecting rod, all parts are steel, can be welded
or glued with gell superglue. Holes are .120 for 4-40 screws.
These are great detail parts for boxcars, gondolas,
refridgerator cars,
Price; 25.00 Pics show how they look installed
These are our modern car ladder kits, come with every thing pictured.
Long ladder kit is 8 inches tall.
Short ladder kit is 5 1/4 inches tall.
Both come with 14'' long connecting rod, all parts are steel, can be welded
or glued with gell superglue. Holes are .120 for 4-40 screws.
These are great detail parts for boxcars, gondolas,
refridgerator cars,
Price; 25.00 Pics show how they look installed
Walkways; These are 1/8 inch thick cut out steel for the
walkways on the end of boxcars and gondolas and other cars.
These in pictures are 4 inches long x 1 1/16 inch wide.
Price; 10.50 each
We can make these in almost any size you need,
Great for boxcar roof walkways , caboose walkways
and steps, this is a great detail piece for steel grate
found on so many prototype cars.
walkways on the end of boxcars and gondolas and other cars.
These in pictures are 4 inches long x 1 1/16 inch wide.
Price; 10.50 each
We can make these in almost any size you need,
Great for boxcar roof walkways , caboose walkways
and steps, this is a great detail piece for steel grate
found on so many prototype cars.
Boxcar door stops;
These are the stops used on boxcars when doors are fully open.
This is a weld together piece, 1/4 inch thick steel
Kit Price; 6.00 each
These are the stops used on boxcars when doors are fully open.
This is a weld together piece, 1/4 inch thick steel
Kit Price; 6.00 each
STIRRUPS;
Total of 4 stirrups for 13.50 $.
or 3.50$ each , These
are steel .
Total of 4 stirrups for 13.50 $.
or 3.50$ each , These
are steel .
GRAB IRONS TYPE # 9
Hopper car grab irons in
rh and Lh bend
Hopper car grab irons in
rh and Lh bend
BOXCAR / CABOOSE ROOF RIBS
THESE are three styles offered , long one is a modern boxcar
roof rib offered in our boxcar kits, 15 1/2 inches long , short
one with rivet holes is for our caboose in development. 14
inches long, these are available in custom lenghts with or
without rivet holes, these have been out since 1-8-2009 with
over 400 sold, with great feedback , 3.75 each, quanity
discounts available,
THESE are three styles offered , long one is a modern boxcar
roof rib offered in our boxcar kits, 15 1/2 inches long , short
one with rivet holes is for our caboose in development. 14
inches long, these are available in custom lenghts with or
without rivet holes, these have been out since 1-8-2009 with
over 400 sold, with great feedback , 3.75 each, quanity
discounts available,
ALL GRAB IRONS ARE STEEL, STRONG